Barrera Dugan posted an update 2 months, 1 week ago
Our electrical cabinet panel coolers are a simple, reliable and inexpensive method to cool and climatize all types of electrical panels and enclosures. The Supreme Air Electrical Panel Cooler is an efficient pneumatic product designed to separate regular compressed air into hot and cold air streams. Our coolers only require compressed air to operate, which eliminates the need for dangerous refrigerants or freon gases. With large cooling capacities of up to 7200 BTUs, they provide the perfect solution for quick and effective cooling in numerous types of electrical cabinets and enclosures.
How does a Cabinet Cooler work?
The cooler mounts vertically on top of the cabinet through a standard knockout hole. The cooler comes with a locking ring that locks it in place.
The compressor air line connects to the cooler via a 1/4 NPT fitting.
The integrated vortex tube separates compressed air as it enters the cooler.
The vortex tube’s hot steam is emitted into the atmosphere through a muffler, which produces low levels of noise.
Through an outlet tube at the bottom, cold air is drawn into the cabinet.
As the cold stream enters the electrical cabinet, the hot air within the cabinet starts to rise and is gradually purged through the cooler.
We also offer an optional cold air distribution kit which connects to the cooler’s outlet tube and allows the user to direct the cold stream to specific hot spots within the cabinet. All Supreme Air Products electrical panel coolers are made from stainless steel, which ensures durability.
Specifications for Cabinet Coolers
Supreme Air Products(tm) Cabinet Cooler must be vertically mounted on a flat surface for all enclosure types. A 1-1/8″ diameter hole or electrical knockout can be used to mount an electrical cabinet cooler unit. The locking ring holds it in place. For those coolers that cannot be mounted on top of cabinets due to height restrictions, we offer side mount kits.
It is crucial to seal off all openings and vents that could allow in ambient air, particularly in hot or humid environments. Cabinet Coolers that are continuously in operation maintain a relative humidity of 45%.
Clean filtered air should be used on all lines that power the Cabinet Cooler. We recommend a 5 micron auto drain filter. To prevent accidental water from entering the enclosure, it is important to filter properly. If oil is present in the compressed air supply, use an oil filter with a minimum 0.3 micron rating.
NEMA 4/4X (IP56) – Designed for Electrical Control Panels – Splash resistant, oil-tight, and dust-proof for use in wash down environments as well as outdoor use. For long-lasting use in wet environments, coolers are made of Type 304 Stainless Steel.
NEMA 12 (IP52) – Cabinet Coolers (oil-tight, dust-proof) are used in industrial environments where no liquids can come into contact with the unit. Coolers are constructed of Stainless Steel (Type 304) to withstand harsh corrosive environments.
For more info about cabinet cooling just go to this useful website